The upper slider transmission part mainly consists of upper slider, power box, magnetic scale, screw, synchronous wheel, roller guide mechanism and so on.

Introduction to HPE Series Equipment

The upper slider transmission part mainly consists of upper slider, power box, magnetic scale, screw, synchronous wheel, roller guide mechanism and so on. The left and right power boxes are connected with the frame by bolts, and the screw nut is directly connected with the slider, which has a large bearing capacity. The slider is connected with the frame by the roller guiding mechanism. Roller guiding mechanism is equipped in the front, back, left and right direction of the slider, which can make the slider move smoothly and effectively prevent the slider from deviating left and right. The roller guiding mechanism allows easy adjustment of the clearance between the rollers and the guiding block, thus minimising wear on the guide of the slider. The C-shaped plate on both sides of the frame is equipped with a magnetic scale, which is used to control the upper limit position and lower limit position of the slider stroke, the position of the transition point between the empty stroke and the working stroke, as well as to detect and synchronise the movement status of the two screws.

THE MAIN TECHNICAL PARAMETERS